He also cut the frame and installed a short bed. The carpet looks to be original and is in decent shape. Winning bidder must contact me within 24 hours of the end of the auction to make payment arrangements. The aftermarket radio powers up. Proudly serving automotive enthusiasts since 1987 © Copyright 1987® U. It comes with the original glovebox paperwork and dealer literature as seen in the photos. The previous owner started the swap but never finished it.
Shipping is the buyer's responsibility, ut I'll of course make myself available for the shipper and help him load. The Interior lights and headlights don't seem to power up when you turn the key but I'm guessing it is a fuse or a loose wire. Based looking closely at it, t looks like it will shine up very nicely. I believe it still wears its original paint. Ebay message me or call me, y cell is 805 405-0765, y name is Walker. And if you have mad skills like these guys, doing things this way will save you a ton of coin.
The carb is a Holley 1850-4 and I purchased the factory rebuild kit for it. The buyer must be present with cash to utilize the free tow. This is one neat C10 cruising the streets of Massachusetts, and we dig it! Full payment must be made within 7 days of the close of the auction via Cash, ashier's check, r Money order. It has a Holley Intake manifold. His Godfather, Mike Six, builds race motors and helped put together a stout 355 ci small block Chevy making north of 500 horsepower. If I don't answer, eave a message and I'll get back to you.
But that was what happened last fall in Las Vegas. Once finished these cabs look exceptional and should just about last forever, however, sit down and Please give some serious thought before ordering. They must be picked up in person to avoid freight damage. Needs to be cut out and replaced with new metal. Folkestad continued using the truck while obtaining a degree in Graphic Design from Iowa State.
Starting with a nice, clean cab and bed certainly has its benefits when taking on a build. To install - simply drill thru the bed and the under floor reinforcements and thru bolt it in place with O. Living in New England, sourcing decent early steel is somewhat limited since winter road salt eats trucks for a living, so he expanded his search to the West Coast. Based looking closely at it, t looks like it will shine up very nicely. All Items are American Made Fiberglass Components. The Door Panels are in excellent shape.
Feel free to call or text message me and ill answer any questions you might have. Engine was in good shape when i purchased it but i had it rebuild new anyway. They must be picked up in person to avoid freight damage. I didn't want to run it too long without everything else installed. The master Cylinder has brake fluid but I haven't really tested them as I got it towed from the previous owner to me. The master Cylinder has brake fluid but I haven't really tested them as I got it towed from the previous owner to me. Corbin then installed the Painless Performance kit to bring it all together combined with tunes flowing from a stereo from Dual.
The tires hold pressure fine. For more information, call us at 682 587-6671 or please visit our website at www. I tested the motor with a fuel line to a fuel tank to ensure I was feeding it clean fuel. All of the cooling system parts appear to be here as well. Without wasting any time he began a gradual process of updating the hauler. I planed on restoring the truck but i hit a snag need some cash so selling my truck. The use of names and headings is for the sole purpose of identification.
The power steering pump is not installed but comes with the truck. Ever since he can remember there were always projects being worked on in the family garage, along with plenty of entertainment for the youngsters in the form of go-karts and dirt bikes. Please note that all sales are binding and final. The front-passenger tire was not holding pressure well so I got it repaired at a tire shop. The truck's Odometer says 14587, ut that is unconfirmed.